Standard safety-beam mounting wasn't suitable for this outward-swing automatic gate in Concord West NSW. See how gate geometry, vehicle movement, pedestrian areas and the swing arc led to a custom-fabricated mounting solution.

Should an ageing automatic gate motor be repaired again or replaced? This Minchinbury NSW guide explains how motor condition, parts availability, previous failures, repair costs, site usage and expected future reliability should influence the decision.

Proper automatic gate maintenance goes far beyond lubrication. From safety testing and electrical inspection to mechanical checks, settings, manual release testing and documentation, see what a comprehensive maintenance visit should include.

A swing gate can still open and close while being incorrectly adjusted. This Seven Hills NSW repair shows how mechanical stops, hinge geometry, motor stroke and limit settings affect the final closing position.

Damaged or seized sliding gate wheels can increase mechanical resistance and force the gate motor to work harder during every cycle. This Dover Heights NSW case explains how wheel condition, track movement and motor load are connected—and why mechanical faults should be corrected before blaming the automation.

A busy transport facility in Alexandria required controlled access without disrupting vehicle flow. See how two Beninca EVA5 boom gates, carefully positioned detection and automatic exit loops were designed as one efficient vehicle access system.

Limited space, a heavy gate and high expected usage made a conventional sliding gate unsuitable for this Bondi Beach project. See how a three-section telescopic sliding gate was designed to achieve the required opening within the restricted available space.

An automatic gate manual release may remain unused until a power failure or breakdown makes it essential. This preventative maintenance topic explains why testing the release, checking the key and ensuring responsible personnel understand the procedure can improve emergency readiness.

An automatic gate can have power at the control board and still refuse to move. Learn how automatic gate faults in Mosman NSW can be diagnosed by checking power, safety circuits, controller status, motor output and mechanical gate condition.

An automatic gate can stop, struggle or display motor faults even when the motor itself is still operational. Learn how wheels, tracks, hinges, rack alignment and physical resistance can create faults that appear to be automation problems.